Lubrication & Maintenance/Daily
RG19661,00003D3 -19-29JAN13-4/4
4. If equipped with air intake restriction indicator gauge
(A), check gauge to determine if air cleaner needs to
be serviced. The reset button will pop up when air
cleaner needs to be serviced.
IMPORTANT: Maximum air intake restriction is 625
mm (25 in. H
2
O). A clogged air cleaner element
will cause excessive intake restriction and a
reduced air supply to the engine.
5. Make a thorough inspection of the engine
compartment. Look for oil or coolant leaks, worn drive
belts, loose connections and trash build-up. Remove
trash buildup and have repairs made as needed if
leaks are found.
NOTE: Wipe all fittings, caps, and plugs before
performing any maintenance to reduce the
chance of system contamination.
Inspect:
•
Engine shields and guards for trash build-up.
•
Air intake system hoses and connections for cracks
and loose clamps.
•
Alternator drive belt for cracks, breaks or other
damage.
•
Water pump for coolant leaks.
•
Coolant system for leaks.
NOTE: It is normal for a small amount of leakage to
occur as the engine cools down and parts contract.
RG9874
—UN—12FEB99
Air Intake Restriction Gauge
A—Air Intake Restriction
Gauge
Excessive coolant leakage may indicate the need to
replace the water pump seal. Contact your engine
distributor or servicing dealer for repairs.
6. Turn key switch to “ON” position and check instruments
for proper operation. Turn key switch “OFF”.
7. Refer to manufacturer's literature for marine gear and
generator set daily service recommendations.
OM-C3 | 12/6 | 29
Summary of Contents for M65C13
Page 11: ...Notes OM C3 12 6 9...
Page 121: ......
