User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc.
-
25
-
Note:
Nurse Call function can not be regarded as main alarm notice method, please do not
entirely relay on it. You should combine parameter values with alarm level and patient’s
clinical behavior and symptom to determine patient’s status.
4.4.4 System Setup
Figure 4.9 System Setup Screen
“Vol”: set beeper volume, “0~7” level adjustable, the set “0” i.e. no sound.
“key beep”: to turn on/off key beep;
“LANG”: language selection. Two options: “ENG” for English or “CHN” for Chinese.
“PR SRC”: source of pulse rate value. The default set is SpO2, it can not be adjusted.
“backlite”: turn on/off backlight;
“contract”: adjust LCD display contract, “0~7” level adjustable;
“care mode”: “Demo” shows the demo waveforms and data. In the demo state, all the
signals and data are generated from the patient monitor for
demonstration and testing purpose. “Real” shows the real time
waveform, i.e. normal monitoring status;
BT SD: turn on/off the pulse beeping sound.
