![North-Vision Tech Deluxe-80 User Manual Download Page 12](http://html.mh-extra.com/html/north-vision-tech/deluxe-80/deluxe-80_user-manual_1708131012.webp)
User Manual for Multi-parameter Patient Monitor North-vision Tech. Inc.
-
12
-
Introduction to the rear panel:
1 Handle
2 Fan
3 Nameplate
4 Fuse holder: FUSE T3.15A
5 AC power supply socket
6 Loudspeaker
7 Mounting hole for hanging the monitor
8 Data interface
9 Nurse-call connector
10 : Equal potential terminal
3.2 Installation
3.2.1 Opening the Package and Check
1. Open the package, take out the monitor accessories from the box carefully and place it in a
safe stable and easy to watch position.
2. Open the accompanying document to sort the accessories according to the packing list.
◆
Inspect the monitor for any mechanical damages
◆
Check all the accessories for any scratch or deformity, especially on connector, wire
and probe parts
If in doubt, please contact the local dealer or our company in case of any problems. We are to
offer you the best solution for your satisfaction.
3.2.2 Connecting the Power Supply
1. When powered by AC mains power supply:
◆
Make sure that the AC mains power supply is within 100-250VAC with 50Hz or 60Hz.
◆
Use the power cord provided by the manufacturer. Insert one end of it to the power
port of the monitor and the other end to the single-phase mains power outlet with
protected earth.
◆
Caution: if necessary, make the monitor grounded properly by the provided grounding
wire.
2. When powered by built-in battery
◆
Install battery: refer to 3.3.4 Battery Installation.
◆
Caution: it’s better to recharge the battery after it is used up, the charging time should
be 13~15 hours long.