Storage
34
2.
Lubricate cylinder and piston:
a.
Disconnect spark plug wires and remove spark plugs
b.
Add one teaspoon oil through spark plug holes
c.
Place rag over spark plug holes and turn starter (or pull the recoil) a
few times to lubricate the combustion chamber.
d.
Replace spark plugs, but do not reconnect the spark plug wires.
Prepare pressure
washer for storage
Prepare the pressure washer for storage.
1.
Disconnect the battery, remove it from the battery compartment, and
store it indoors.
2.
Make sure the engine start switch is OFF and fuel valve is OFF.
3.
Disconnect the engine spark plug wire if you haven't already done so.
4.
Disconnect the high-pressure hose, garden hose, and spray gun.
Move pressure
washer to storage
location
Let engine cool for 5 minutes
before moving the pressure washer to it's
storage location.
