Hazard Signal Word Definitions
Equipment Protection Quick Facts
Inspect Upon
Delivery
STOP!
Closely inspect to make sure no components are missing or damaged. See the
"Assembly and Initial Set-Up" section for instructions on whom to contact to report
missing or damaged parts.
Fill with
Engine Oil
STOP!
Engine is shipped without oil. DO NOT start pressure washer without adding oil
to engine. Please refer to Engine Manual shipped with unit for acceptable grade motor
oils.
Check Pump
Oil
Pump is shipped with oil. Check pump oil level before starting.
Battery
Required
A battery is not included. A
battery must be installed before starting the engine
or
damage to the engine voltage regulator will result. Purchase a standard 12VDC, 18 Ah
lawn and garden battery (Group U1-7).
Water Flow
Requirements
Make sure your supply water flow rate is 20% higher than the pressure washer's flow rate
(see "Specifications" section for detail), and that your water is clean and particle free.
Storage Do not allow water to freeze in the pump, hose, or spray gun(s).
Chemical
Spraying
Use only NorthStar brand or equivalent washer chemicals designed for high-pressure
use. Use soap adjustment knob to regulate cleaning power (on select units).
Maintenance
Schedule
Engine:
See Engine Owner's manual.
Pump:
Change oil after first 40 hours, then every 3 months or 500 hours.
Check mounting bolts regularly for proper torque.
Belts:
Check belt tension after first 24 hours of use, then routinely with each
oil change. Tighten or change belts as needed.
