Nortel SRG50, Configuration Manual

Page: 30 / 111

30 Chapter 2 Task summary
N0060720 N0060720
Dialing plan configuration
a Configure the type of dialing plan (CDP or UDP).
Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan -
Private Network
panel > Private Network Settings subpanel
Internal Reference: “Private dialing plan” on page 78
External Reference: BCM50 Networking Configuration Guide (N0027156)
b Enable MCDN TAT.
Configuration > Telephony > Dialing Plan > Private Network > Dialing Plan -
Private Network
panel > Private Network Settings subpanel
Internal Reference: “Meridian Customer Defined Network (MCDN)” on page 79
External Reference: BCM50 Networking Configuration Guide (N0027156)
VoIP trunk configuration
a Configure VoIP trunk QoS settings.
Configuration > Resources > Telephony Resources > Modules panel > IP Trunks row
> Media Parameters tab
Internal Reference: “QoS settings (codec, jitter buffer, and related items)” on page 80
External Reference: BCM50 Networking Configuration Guide (N0027156)
b Enable or disable fallback.
Configuration > Resources > Telephony Resources > Modules panel > IP Trunks row
> Local Gateway tab
Internal References:
“Configuring fallback” on page 83
“Call routing: providing access to the SRG50 PSTN” on page 88
External Reference: BCM50 Networking Configuration Guide (N0027156)
c Configure gatekeeper settings (CS 1000 only).
Configuration > Resources > Telephony Resources > Modules panel > IP Trunks row
> Local Gateway tab
Internal Reference: “Gatekeeper routing (CS 1000 only)” on page 84
External Reference: BCM50 Networking Configuration Guide (N0027156)
d Assign VoIP trunks to a line pool (if default configuration has not been maintained).