N
ORTEL
TPS 3D S
ENSOR
AND
D
EFENSE
C
ENTER
I
NSTALLATION
G
UIDE
R
ELEASE
4.7.0
PAGE
36
Chapter 2: Installation
3D SENSOR 2x50/2x70
Performing the initial setup
After physically installing the 3D Sensor and setting up the IP address for the
management interface, the user must log into the 3D Sensor’s web interface and
continue the setup process. After performing the initial setup, refer to the user
guide for information for the next steps.
See the following sections for more information:
•
“Accessing the web interface” on page 36
•
“Changing the default password” on page 37
•
“Configuring the network settings” on page 37
•
“Setting up the base license” on page 38
•
“Setting up remote management” on page 39
•
“Installing software updates” on page 39
•
“Importing SEUs and rule files” on page 40
•
“Choosing default or custom interface sets and detection engines” on
page 41
•
“Creating an intrusion policy” on page 41
•
“Applying an intrusion policy” on page 42
•
“Configuring a system policy” on page 42
Accessing the web interface
1.
Connect to the management interface securely to access the GUI. To access
the GUI through the management interface, browse to the IP address
configured in
“Setting the IP Address for the Management Interface” on
page 35
, for example,
https://192.168.10.5/.
The Login page appears.
2.
Type
admin
for the login name and
Nortel
for the password.
3.
Click Login. The End User License Agreement (EULA) screen appears.
4.
Read the agreement and, click Agree to proceed. The Change Password
page appears. Continue with
“Changing the default password” on page 37
.
Summary of Contents for Softphone 2050
Page 56: ......
