N
ORTEL
TPS 3D S
ENSOR
AND
D
EFENSE
C
ENTER
I
NSTALLATION
G
UIDE
R
ELEASE
4.7.0
PAGE
33
Chapter 2: Installation
3D SENSOR 2x50/2x70
3D SENSOR 2x50/2x70
The Nortel TPS 3D Sensor 2x50 and Nortel TPS 3D Sensor 2x70 offer the
flexibility to modify existing rules, tune the rule set, and create custom rules. They
provide quick snapshots of exploits against a network and save detailed packet
information showing TCP/IP headers and payload. When specific attack data is
analyzed, the user is able to easily search the event and packet data in the
database.
3D Sensor 2x50 and 3D Sensor 2x70 deliver high-quality, real-time intrusion
detection as well as:
•
comprehensive attack recognition
•
rules written in the Snort rules language
•
configurable rules and preprocessors
See the following sections for more information about installing a 3D Sensor:
•
“Security considerations” on page 33
•
“Installing the 3D Sensor 2x50/2x70” on page 33
•
“Setting the IP Address for the Management Interface” on page 35
•
“Performing the initial setup” on page 36
•
“Console output” on page 42
Security considerations
Before installing the 3D Sensor 2x50/2x70, Nortel recommends the following:
•
Place the 3D Sensor in a lockable rack within a secure location that
prevents access by unauthorized personnel. If installing a desktop model,
place it within a secure location that prevents access by unauthorized
personnel.
•
Allow only trained and qualified personnel to install, replace, administer, or
service the 3D Sensor.
•
Always connect the management interface to a secure internal management
network that is protected from unauthorized access
Installing the 3D Sensor 2x50/2x70
To install the 3D Sensor do the following:
TIP!
The 3D Sensor is delivered on different hardware appliances. Refer to the
correct illustration for the appliance while following the installation procedure.
Summary of Contents for Softphone 2050
Page 56: ......
