Page 48 of 66
Data administration
553-2811-200
Standard 6.0
December 1994
PTYP
Port type at far end.
Analog Tie trunk routes
AST
(ATT)
AOT
Analog satellite PBX TIE trunk or ESN satellite PBX TIE trunk.
Analog Tie trunks.
Analog Tie trunk, used instead of “ATT” whenever the PBX has
one or more satellite trunk routes (DST) to any digital satellite PBX
that includes OPX telephones.
Digital Tie trunk routes
DCT
DST
(DTT)
Combination satellite PBX TIE trunk.
Digital satellite PBX Tie trunk.
Digital or combination Tie trunk.
Analog CO trunk routes
(ACO)
ATO
Analog CO trunk.
Analog Toll Office trunk.
Digital CO trunk routes
(DCO)
DTO
Digital or combination CO trunk.
Digital or combination Toll Office trunk.
AUTO
Yes, (No)
Auto-terminate must be NO if response to DSEL was VOD.
SIGO
aaa
ESN signaling arrangement.
Prompted if the network signaling package is equipped, voice
channels are configured VOD, and response to TKTP was TIE.
The allowed values are as follows:
STD
ESN2
ESN3
ESN5
EN19
ETN
Standard signaling arrangement.
Supports NCOS, TCOS, and CCBQ call types.
Supports Network Call Transfer, Satellite Link Control, and all
ESN2 call types.
Supports DTI data calls plus all other call types; not allowed if
response to AUTO is Yes.
Supports Transparent Data Networking and all ESN5 call types.
Provides Electronic Tie network signaling arrangement.
STYP
SDAT, STDN
If Standard signaling arrangement (SIGO=STD).
Uses Standard Data Signaling or Transparent Data Networking
Signaling.
MANO
Yes, (No)
Manual outgoing trunk route.
Must be NO if response to DSEL was VOD or if response to SIGO
was ESN5. Define the manual DN in LD 14 (prompt MNDN).
Prompt
Response
Comments
