Page 46 of 66
Data administration
553-2811-200
Standard 6.0
December 1994
Note:
ESF can be specified for the QPC720 using X11 release 12 and later software.
MODE
TRK, LINK
The mode in which the DTI hardware will be used.
TRK = Digital Trunk mode, LINK = Digital Link mode.
LCMT
B8S, AMI
The line coding method.
B8S = B8ZS binary 8 zero code substitution.
AMI = B7 zero substitution.
The default is B8S if the frame format is ESF; otherwise, the
default is AMI.
YALM
DG2, FDL
The Yellow Alarm Pattern.
DG2 = Digit 2.
FDL = Facility Data Link.
The default is FDL if the frame format is ESF; otherwise, the
default is DG2.
TRSH
0-15
Digital Trunk threshold telephone.
Enter the threshold telephone defined in LD 73.
DTIC
0-159
The starting network loop slot occupied by the DTI card. It marks,
as occupied, the loop slots taken up by the DTI card. On
non-network loops, enter <cr> and ignore the message SCH
2035.
OVLY
Yes, (No)
Change overlay area options.
SID
xxxx
System ID number.
The SID is used for polling a Meridian 1 for ACD, CDR, and Traffic
reports.
DROL
60
Include DTI Hardware diagnostic in daily routines (LD 60).
Prompt
Response
Comments
