Nortel Nortel IP Phone 1230 User Manual Download Page 176

Page: 176 / 188

Terms you should know

176

DHCP Server

A service provided by a device on the network that assigns
network addresses to other devices, such as your telephone and
computer.

Directory Number (DN)

A number consisting of one to seven digits for an IP Phone, and
also known as an

extension number

Feature display

An area that shows status information about the feature in use. It
also displays the name and status of the active session.

Feature Status Lamp indicator

An LCD or an LED that indicates a data message, contact, or
feature status by a flash, wink, steady on, or off.

Fixed key

The hard-labeled keys on your IP Phone.

Flexible Feature Codes (FFCs)

Specialized codes entered using the dialpad that enable features
(for example, Ring Again).

Goodbye key

A fixed key used to end an active call.

Idle

The phone is in idle mode when handset is on the cradle, your
telephone is not in speakerphone mode or headset mode, and
there are no incoming calls. In idle mode, the LCD displays Date
and Time along with soft keys and registered line keys.

Summary of Contents for Nortel IP Phone 1230





























































































































































































Search results

Summary of Contents for Nortel IP Phone 1230

Reviews:

Related manuals for Nortel IP Phone 1230

Brands by name

Popular brands

Nortel Nortel IP Phone 1230, User Manual

Search results

Summary of Contents for Nortel IP Phone 1230

Reviews:

Related manuals for Nortel IP Phone 1230

Brands by name

Popular brands