Nortel Nortel IP Phone 1230 User Manual Download Page 154

Page: 154 / 188

Operating your IP Phone 1230

154

•

Call Recording (CR) application in ROD Mode - Press the ROD key
during an active call to record the call

•

Bulk Recording - For an active call or unregistered DN/Position ID,
call recording is initiated even though the ROD key is not pressed..

Using SAVE key

Use the

SAVE

feature key to save the recording of an active call. This key

is associated with the active user ID and is operational only if a call is
active.

The

SAVE

key is displayed in the following scenarios:

•

Normal operations - If the

SAVE

key is pressed during an active call,

the call is saved.

•

CR application in Bulk Save everything mode - Recorded
conversation is saved at the end of the call. If the

SAVE

key is

pressed, then the call is not saved.

•

CR application in Bulk Delete everything mode - Recorded
conversation is deleted at the end of the call. If the

SAVE

key is

pressed, then the call is saved.

The

SAVE

key lamp status depends on the status of the call recording. If

the call is to be saved, then the lamp is lit..

1. Press the

ROD

key during an active call.

2. To stop the call recording, press the

ROD

key

again.

1. Press the

ROD

key during an active call.

2. To stop the call recording, press the

ROD

key

again.

Summary of Contents for Nortel IP Phone 1230





























































































































































































Search results

Summary of Contents for Nortel IP Phone 1230

Reviews:

Related manuals for Nortel IP Phone 1230

Brands by name

Popular brands

Nortel Nortel IP Phone 1230, User Manual

Search results

Summary of Contents for Nortel IP Phone 1230

Reviews:

Related manuals for Nortel IP Phone 1230

Brands by name

Popular brands