Nortel NN10364-301 Installation And Commissioning Manual Download Page 70

Page: 70 / 176

NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006

cp [ space] Install_CD_to_Disk [ space] /

[Enter]

cd [ space] /

[Enter]

./Install_CD_to_Disk

[Enter]

Storing data from CDs to the /IMS/ora_cds
directory [Y]?

: Select

[Enter]

Please insert Oracle Disks [2-6] into the CD-ROM drive [Enter]

Note:

You will receive the following prompts for each CD

entered:

Copying files from CDROM to /IMS/ora_cds/Disk
[1-6]

Performing check sum on /IMS/ora_cds/Disk
[1-6]

ATTENTION

Make sure you put a space before the ending slash (/) in step 5.

ATTENTION

Contact support if you do not receive the following response:

Check sum Oracle Disk [1-6] passed for each
Oracle CD inserted into the CDROM

ATTENTION

In step

you will enter the hostname twice. The

sec_db_hostname is the same as the pri_db_hostname for a
42-server non-redundant configuration.

Summary of Contents for NN10364-301


























































































































































Search results

Summary of Contents for NN10364-301

Reviews:

Nortel NN10364-301, Installation And Commissioning Manual, Page: 70 / 176

Search results

Summary of Contents for NN10364-301

Reviews: