Nortel NN10364-301, Installation And Commissioning Manual, Page: 148 / 176

NN10364-301 MCS 5100 3.5 Standard 6.0 December 2006
148
Copyright © 2006 Nortel Networks
Procedure 42 Configuring the iPlanet Monitor
At the System Management Console,
1
Use the values from the table that follows to complete the Web
Monitor tab parameters.
Note: The shaded rows indicate values that must be
addressed by the installer.
ATTENTION
Do not click Apply until you have finished configuring the tab.
Table 40 Web Monitor tab (Sheet 1 of 12)
Parameter Recommended value Notes Example
SNMP request port 8161 default
SNMP agent IP address <machine logical IP of
Provisioning Module> 192.168.14.41
120.120.13.25
Active checked default
Component Monitoring:
Class name com.nortelnetworks.i
ms.mw.probe.iplanet.I
planetProcessHandler default
Component Monitoring:
Component name Process Stats default
Component Monitoring:
Polling interval in minutes 1 default
Component Monitoring:
Active for polling checked default
Component Monitoring:
Threshold monitors:
Gauge name percentConnectionQu
eueUsage default
Component Monitoring:
Threshold monitors:
Upper limit 100 default