Nortel NN10364-301, Installation And Commissioning Manual, Page: 119 / 176

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide
Copyright © 2006 Nortel Networks
Adding and configuring the IP Client
Manager
Prerequisites
Make sure that
• The System Management Console has been successfully installed
and started.
• A valid license key has been entered and accepted by the
management system.
Procedures
Procedure 32 Adding the IP Client Manager (Small SharedMicro)
component
At the System Management Console,
1 Select Sites->MgmtSite->Servers->Add->General->AppSvr
See Adding a server on page 101 for information on how to add
a server before adding the AppSvr.
2 Click on the plus sign next to the server to which you are adding
the component.
3 Right click on the Components folder.
4 Select Add -> Component .
5 A list of component loads appears in the Load List window.
Select the latest Small SharedMicro load.
6 Click Apply . Wait for the new component and the component
configuration window to appear.
7 Enter a label (maximum six [6] characters) in the Service
Component Name field at the bottom of the configuration
window. The Service Component Name must be unique among
all components.
Example: IPCM1