Nortel NN10364-301 Installation And Commissioning Manual Download Page 69

Page: 69 / 176

MCS 2-server Sun Fire V100 Solaris Installation and Commissioning Guide

Installing Oracle 9.2.0.4 on the database
server

The procedures to install Oracle 9 on the DBSvr include storing Oracle
9 CDs 1-6 to your local hard drive. Refer to the section that follows.

Approximate time for loading Oracle 9 = 90 minutes

Installing Oracle 9.2.0.4

Procedure 20 Installing Oracle 9.2.0.4 on the database server
(DBSvr)

At the management pc,

Use PuTTY to connect to the database server using Serial port
B, which connects to the LX terminal server.

root

to the database server.

Enter your

<customer-specific password>

Insert Oracle 9.2.0.4 CD 1 into the CD-ROM drive on the server.

cd [ space] /cdrom/cdrom0

[Enter]

ATTENTION

Refer to the CSI datasheet for such items as the hostname, IP
addresses, and subnet masks.

ATTENTION

Perform these steps on all servers in parallel if multiple CDs are
available.

Summary of Contents for NN10364-301


























































































































































Search results

Summary of Contents for NN10364-301

Reviews:

Nortel NN10364-301, Installation And Commissioning Manual, Page: 69 / 176

Search results

Summary of Contents for NN10364-301

Reviews: