manualshive.com logo in svg

Nortel Meridian M3900, Reference Manual

Share
Download
Nortel Meridian M3900 Reference Manual Download Page 13

 13

Meridian SL-100 M3900 Meridian Digital Telephones Reference Guide

M3900 series general description

Purpose

This chapter introduces you to the M3900 series digital telephones.

Introduction

The M3900 sets provide integrated voice and data communication. The 
M3900 sets communicate with the Meridian SL-100 switch through 
digital transmission over standard twisted-pair wiring.

The five models of the M3900 series telephones include the M3901, 
M3902, M3903, M3904, and M3905. Each of the M3900 sets have 
specific characteristics and support features using the following keys:

•

fixed feature

•

programmable line/feature (self-labeled)

•

programmable feature (self-labeled)

•

context sensitive softkeys

Minimum firmware requirements

The M3900 Release 3 telephone sets supported on the Meridian 
SL-100 require the following Release 3 firmware:

•

M3902 Firmware version 8.0

•

M3903 Firmware version 8.0

•

M3904 Firmware version 8.2

•

M3905 Firmware version 8.1

For information about how to obtain the latest firmware files, see 

“Features, firmware, and software management” on page 101

.

Note: If you are using the Full Duplex Handsfree accessory with the 
M3904, the minimum firmware version is 8.3.

Due to several improvements made with M3900 Release 3 firmware 
and XPM 17, when you upgrade sites to XPM 17 all M3900 telephones 

Summary of Contents for Meridian M3900













































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands