i
2021 ISDN Teleset
i
Mandatory Customer Information
Federal Communications Commission (FCC) Requirements
This equipment complies with Part 68 of the FCC Rules. The FCC registration
information is located on a label affixed to the bottom of the Teleset. If requested,
you must provide the telephone company with the following information: Facilities
interface Code (FIC) 02IS5, Service Order Code 6.0Y, and Registered Jack RJ-
49C
*
.
FCC regulations require an FCC Registered NT1 device be used when connecting
this Teleset to the network.
If your telephone equipment causes harm to the network, the telephone company
may discontinue your service temporarily. If possible, they will notify you in
advance. But if advance notice is not practical, you will be informed of your right to
file a complaint with the FCC.
Your telephone company may change its facilities, equipment, operations or
procedures that could affect the proper functioning of your equipment. If they do,
you will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service.
If you experience trouble with this telephone equipment, please contact your
telephone equipment distributor for repairs. The telephone company may ask that
you disconnect this equipment from the network until the problem has been
corrected.
Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a Class B
digital d evice as specified in Part 15 of the FCC rules. These rules are designed to
provide against radio-frequency interference in a residential installation. However,
there is no guarantee that harmful interference will not occur in a particular
installation.
*
The RJ-49C refers to the network jack provided by the telephone company. This
is the jack that interfaces to the FCC registered NT1 device, not the jack on the
bottom of the
i
2021.
Trademark Acknowledgment
5ESS
is a registered trademark of Lucent Technologies.
DMS-100
is a registered trademark of NORTEL, Inc.
EWSD and Siemens
are registered trademarks of Siemens Information and
Communication Networks
GTD-5
is a registered trademark of AG Communications Systems
Summary of Contents for i2021 Series
Page 2: ......
Page 16: ...i2021 ISDN Teleset 10 Installing the Logo Plate...