i
2021 ISDN Teleset
47
The
Conf
key will always change to
AdNext
. If you only subscribe to 3-
Way Conferencing, you cannot add any more to the conference.
CONFERENCING AN INCOMING CALL TO AN OUTGOING CALL
1. Answer the incoming call.
2. Press
Conf
and proceed as explained above.
CONFERENCING AN OUTGOING CALL TO AN INCOMING CALL
1. Place the outgoing call on Hold by using the Hold key.
2. The outgoing Call Appearance will flash red.
3. Answer the incoming call.
4. Press the
Conf
(conference) softkey and the phone adds dial tone
from another Call Appearance. Ignore the dial tone!
5. Press the first (outgoing) Call Appearance and the dial tone stops.
6. Press the
Join
key and the conference is completed.
CONFERENCING TWO INCOMING CALLS
1. Place the first incoming call on Hold – the first Call Appearance
flashes red.
2. Answer the second incoming call.
3. Press the
Conf
softkey. As above, ignore the dial tone you hear from
another Call Appearance.
4. Press the first Call Appearance, then press
Join
- the conference is
completed.
NOTE: You may press the
Join
key after the second party
answers or while it is ringing.
NOTE: When you attempt to join a 4
th
party, you will receive a
“Service Option Violated” message.
Summary of Contents for i2021 Series
Page 2: ......
Page 16: ...i2021 ISDN Teleset 10 Installing the Logo Plate...
