Nortel Contivity 100, Setting Up

Page: 54 / 78

54 Chapter 4 Configuration switch settings
313369-A
Table 9 shows the switch settings to disable the switch settings for resetting the
passwords and user-defined configurations
.
Table 10 shows the switch settings for resetting your unit to factory default
conditions.
Table 9 Switch settings to disable switch settings for resetting the passwords
and user-defined configurations
1 2 3 4 5 6 7 8
OFF
• •
ON
• • • • • •
Table 10 Switch settings for resetting factory default conditions
1 2 3 4 5 6 7 8
OFF
• •
ON
• • • • • •
Caution:
If you use these switch settings to reset your unit to factory
default conditions, the following user-defined settings are removed or
reset: passwords, hosts, port mappings, unit configuration, access
restrictions, Web site list, cookie control settings, unit registration, and
encryption authorization.
Caution:
If you purchased and installed the 3DES Encryption Module
(part number DM0010001), you need to reinstall it.
Caution:
If you used the switch settings in Table 9 to disable the switch
settings for resetting the passwords and user-defined configurations,
these settings are re-enabled.