Nortel Contivity 100, Setting Up

Page: 51 / 78

51
Setting Up the Contivity 100 Unit
Chapter 4
Configuration switch settings
This chapter describes the configuration switch settings for your Contivity 100
unit, including those for normal operation, for setting the AUX port connection
speed, and for resetting your unit’s passwords and configuration settings.
Configuration switches
Configuration switches enable you to configure your Contivity 100 unit for a
particular type of operation. There are eight Configuration switches on the rear
panel of your unit
(Figure 7) . The switches are labeled left to right from 1 to 8.
Figure 7 Configuration switches on the rear panel of the unit
The switches have two possible positions: on and off. For the Contivity 100 unit,
the off position is up and the on position is down. Use a small instrument with a
fine point, such as the tip of a pen or a straightened paper clip, to move the
switches to the proper position. Labels on the unit indicate whether a switch is on
or off, and the specific switch pattern indicates a specific configuration item.
9871EA
1 2 3 4 5 6 7 8
Off
Configure
On