Nortel CMTS 1000, Install Manual

Page: 98 / 246

4-6 302693-B Rev 00
CMTS 1000 Installation Manual V1.2
Table 4-1 CMTS 1000 CLI Commands
The downstream and upstream port statistics count additional MAC man-
agement messages that are part of the DOCSIS protocol; these are not
counted in the cable statistics.
This is a simple check to determine whether the Ethernet and Cable inter-
faces are working at all.
Command Description
help Prints the console commands.
help <command> Prints detailed help on the commands.
authentication Sets authentication screen.
bp Sets/displays baseline privacy information.
community Modifies, adds or deletes CLI session community.
elog Displays the event log. This is particularly useful
because it shows when modems go off-line.
exit Exits the consoles session.
get Gets an SNMP object.
ipaddress Sets/displays IP addressing.
logout Exits the consoles session.
Manage Manages the MIB.
modems Displays the modems that the CMTS is currently
seeing and whether each modem has registered.
Note that when a modem goes off-line it disappears
from this table. The “index” numbers in the table
always increment, which lets you see whether
modems went off-line. Equivalent MIB:
docsIfCmtsCmStatusTable, which gives you more
information.
more When mode is on, allows controlled access to more
than 24 lines of display.