Nortel 5399 User Manual Download Page 74

Page: 74 / 120

Model 5399 Remote Access Concentrator Network Administrator’s Guide for UNIX

Chapter 2 Simple Network Management Protocol (SNMP)

A-70

Book A

Parameters vs. Private Enterprise MIB

The private enterprise MIB file provides the object descriptions for the
hardware, software, ports, parameters, and commands groups for all
Remote Annex products including the 5399 RAC.

The 5399 RAC supports a subset of the private MIB objects. For
example, objects related to parallel ports are not supported by the
5399 RAC.

Location of Private MIB Files

The standard MIBs reside in the /annex_root/src/snmp directory.

Private MIB Filenames

The software distribution provides this information in Table B-23.

Table B-23. Private MIB Filenames

(continued on next page)

MIB FIlename

Description

xylo.smi

Describes the structure of Bay Networks
Remote Annex management information bases.

xylo-ports.mib

Contains all MIB object groups related to the
management and configuration of ports.

xylo-anx.mib

Contains all MIB objects related to configuring
the 5399 RAC and other Remote Annex
products (i.e, Annex-wide configuration
settings).

xylo-protocol.mib

Contains all of the protocol-related private MIB
groups.

xylo-wan.mib

Contains all of the MIB objects related to
WANs.

Summary of Contents for 5399

























































































































Search results

Summary of Contents for 5399

Reviews:

Nortel 5399, User Manual, Page: 74 / 120

Search results

Summary of Contents for 5399

Reviews: