manualshive.com logo in svg

Nortel 5399, User Manual, Page: 101 / 120

Share
Download
Nortel 5399 User Manual Download Page 101

A-97

Chapter 2    Simple Network Management Protocol (SNMP)

Model 5399 Remote Access Concentrator Network Administrator’s Guide for UNIX

Book A

Table B-38. Call History Statistics (continued)

(continued on next page)

MIB Object Name

Description

CallHistRemoteAT

The remote ARAP address assigned to
this call.

CallHistLocalIPX

The local IPX address assigned to this
call.

CallHistRemoteIPX

The remote IPX address assigned to
this call.

callHistDuration

The call duration in seconds.

callHistConnectionType

The type of connection.
cli (1), slip (2), ppp (3), arap (4),
auto-detect (5), ipx (6), connect (7),
rlogin (8), telnet (9), and tn3270 (10)
The connection default is CLI.

callHistOctetsRx

Number of bytes received for this call.

callHistOctetsTx

Number of bytes transmitted for this
call.

callHistOrigin

The call origin.

originate (1) answer
outgoing (2)

callHistDisconnect Reason

Call disconnect reasons:
authorizationFail (1)
authenticationFail (2)
protocolError (3)
cliInactivityTimeout (4)
inactivityTimeout (5)
netInactivity (6)
localHangup (7)
remoteHangup (8)
timeoutHDLC (9)
maxLogonTimeout (10)

Summary of Contents for 5399

























































































































Reviews:

No comments