manualshive.com logo in svg

Nortel 5399, User Manual, Page: 103 / 120

Share
Download
Nortel 5399 User Manual Download Page 103

A-99

Chapter 2    Simple Network Management Protocol (SNMP)

Model 5399 Remote Access Concentrator Network Administrator’s Guide for UNIX

Book A

Table B-38. Call History Statistics (continued

)

(continued on next page)

MIB Object Name

Description

callHistAsyErrorProtocol

Error correction protocol used by the
modem v42 (1), mnpclass1 (2),
mnpclass2 (3), mnpclass3(4),
mnpclass4 (4)
v42 (1) - Provides end-to-end error
correction through an automatic
repeat-transmission algorithm.
mnpclass1-4 (num 2-5)

callHistAsyCompressionProtocol

Data compression protocol used by the
modem. This is dependent on the error
correction protocol used at the lower
layer.
v.42 (1) - Provides error correction with
data compression.
mnpclass5 (2) - MNP protocol is
effective only when MNP error
correction is active. Limits MNP
operation to the selected MNP class or
lower.

callHistAsyTxPackets

The number of blocks sent by the
modem (does not include blocks
retransmitted).

callHistAsyTxPacketError

The number of blocks retransmitted by
the modem for this call.

callHistAsyRxPackets

The number of blocks received by the
modem for this call (includes the
retransmitted blocks).

callHistAsyRxPacketError

The number of bad packets received by
the modem.

Summary of Contents for 5399

























































































































Reviews:

No comments