10
Figure 4. Roof Top Installation
Figure 3. Ground Level Installation
Condensate Drain
Figure 5. Condensate Drain Location
UNIT SIZE
INTERNAL FILTER SIZE
R8GE-X36
(2) 16” x 25” x 1”
or
(2) 16” x 25” x 2”
R8GE-X48 / X60
(2) 18” x 25” x 1”
or
(2) 18” x 25” x 2”
Table 2. Internal Filter Sizes
Removing Filters from Filter Rack
(3 Phase Only)
1. Remove access panel screws from return air panel. (
Hint:
Loosen the unit’s top panel screws near the top edge of
the access panel. The access panel was designed to be
captured underneath the top panel.)
2. Remove upper filter by gently pulling filter through the access
panel opening.
3. Remove lower filter by lifting media to top of filter rack.
Remove in the same manner as described in step 2.
4. Install new filter in the filter rack as described in the previous
section.
FIL
TER RA
CK
SECURING
SCREWS
Figure 6. Internal Filter Rack Location
