11
Opening and Closing the Garage Door
After the installation is complete, the garage door opener can be activated by the ADT Pulse system and
the door’s status can be viewed through the system.
1.
Restore power to the garage door opener.
2.
Cycle the door open and closed using the wall pushbutton to synchronize the system.
3.
Command the ADT Pulse system to activate the garage door.
4.
Verify that the Garage Door Controller flashes for five seconds before the door moves.
5.
The door should open or close.
6.
Verify that the ADT Pulse system indicates the open or closed status of the garage door.
System Operation
Figure 7. Controller Mounting
FLASH
FLASH
FLASH
BEEP
BEEP
BEEP
Use the ADT pulse touch-screen
or mobile app to control
your garage door, view
status, and add your
garage door control to
automations and modes.
(For example, you can
schedule your garage door
to close nightly at sunset.)
The GD00Z-8-ADT will activate
the door opener and open
or close the door.
STAY CLEAR
OF THE DOOR!!!
3
The GD00Z-8-ADT will beep and
flash for five seconds before
the door moves.
4
5
6
The touchscreen or mobile
app will show the new status
of the door after the door
completes its cycle.
Restore power to your
Garage door opener.
1
To synchronize the system,
use the garage door opener's
push-button to manually open
and close the door.
2
STAY CLEAR
OF THE DOOR!!!
