5
Enrolling the Garage Door Controller
Before the system can be used, the ADT Pulse system needs to enroll the Garage Door Controller. Bring
the Controller near your ADT Pulse Gateway and apply power to the Garage Door Controller.
✓
NOTE:
Before enrolling device to any Z-Wave network, or after removing it from any Z-Wave
network, it is recommended that the Controller be factory reset . Reset the Controller by pressing the
Include
button 5 times .(Location of Include button is shown in Figure 2 on Page 3) . A quick beep
followed by a longer beep will indicate proper reset of the GD00Z-8-ADT .
To add a Garage Door Controller:
1.
Open your Web browser and in the address bar enter:
2.
Enter your
Username
and
Password
, then click the
Sign In
button.
3.
In the Pulse portal, select the System tab, then click the
Manage Devices
button. The Manage
Devices window opens.
4.
In the Manage Devices window, click
Switches/Doors/Thermostats/Others.
The Z-Wave
Devices screen is displayed.
Enrolling with the System
