Norsup 7028005 Original Manual Download Page 4

Page: 4 / 29

Alterations which serve the technological progress as well as errors excepted!

ORIGINAL MANUAL

NORSUP

WWW.NORSUP.EU

Alterations which serve the technological progress as well as errors excepted!

CONTROLLER & LOW SALT ELECTROLYSE UNIT TYPE NORSUPONE

A.2.4.3 CONNECTION OF HEAT PUMP

Only 2 wires are needed to do the Modbus connection

between the Heat Pump and the controller: A and B

(Black and Blue as shown in the image) on the port

2-3 of the RS485 connector on the controller(U12). The

heat pump will automatically stop if the temperature

goes below 10ºC.

Fig. 6: Connection of heat pump from heat pump

board to the Control box

• For a length of less than 20 meters, use a crossover

cable of telecom type, strip a pair and connect one of

the pairs to A and the other to B on port U12.

• On the NorsupOne app, the port number 16 (In

Modbus) is booked for the NorsupOne heater.

A.2.4.3.1 HEAT PUMP PARAMETERS

• Press on the Settings icon on the screen, number

pad will be displayed

• Enter the password 066 and tap on the Enter icon,

System Parameters will be displayed

• Tap on the next arrow till it reach parameter H37, tap

on the Unit address, number pad will be shown

• Enter 50 and tap on the enter icon

• Tap on the back arrow at the left top of the screen to

go back to the normal screen

Fig. 7: Shows parameters setting process

Fig. 8: Shows the Back arrow

A.2.4.4 CONNECTION OF VARIABLE SPEED PUMP

• The ports 13 to 15 of controller (refer figure 10)

corresponds to speed 1, 2 and 3 of variable speed

pump and must be linked to the relay box to any

of the 8 ports (+ the power wire which is port 16)

Fig. 9: Connecting wires of Variable speed pump

Fig. 10: Variable speed pump connection to relay board

• Bridge the red on the 3 NC ports of the 3 selected relays.

Bridge black on the 3 COMMON ports of the 3 relays.

Insert each colour into one of the NO ports, respecting

the numbers of the start connector on the control board.

• Connect the pump power to a suitable power

contactor with START / STOP trigger.

• On the NorsupOne app, the port number 13 (U20) is

booked for the Variable Speed Pump.

A.2.4.4.1 VARIABLE SPEED PUMP PARAMETERS

Once we connected the variable speed pump to the

replay box and controller, we need to change the

mode of the variable speed pump as given below.

• Press on the SET button until the SET UP shows on

the screen.

• Use set till the screen shows E.

• Press on the down arrow to change that to On.

• Press SET and then on the down arrow.

• Press set twice, the STORE option will be shown on

the screen.

Fig. 11: Variable speed pump parameter setting steps

PAC Description

Norsup

One

Type

RS485 - A+ signal

crossed

RS485 - B- signal

crossed

GND common ground - 0V

GND

12 volts

+12v

do not

connect

NOM Description

Bor-

nes

Color

Low pump speed (V1)

Brown (Br)

Average pump speed (V2)

Green (V)

High pump speed (V3)

White (BI)

Common

COM Black (N)

Start/Stop

Red (R)

Summary of Contents for 7028005






























Search results

Summary of Contents for 7028005

Reviews:

Brands by name

Popular brands

Norsup 7028005, Original Manual

Search results

Summary of Contents for 7028005

Reviews:

Brands by name

Popular brands