6
7
Alterations which serve the technological progress as well as errors excepted!
ORIGINAL MANUAL
NORSUP
WWW.NORSUP.EU
Alterations which serve the technological progress as well as errors excepted!
SALT CHLORINATOR
SALT CHLORINATOR
EN
ES
FR
IT
DE
PT
1. FOREWORD
READ, UNDERSTAND AND CAREFULLY FOLLOW ALL
OF THE INSTRUCTIONS IN THIS MANUAL BEFORE
INSTALLING AND USING THIS EQUIPMENT
.
2. SAFETY GUIDELINES
2. FUNCTIONS PERFORMED
ELECTRICAL SHOCK HAZARD
To avoid the risk of injury or accident, install the
equipment out of reach of children and anyone
not authorised to operate and handle the
equipment.
Ensure that the equipment room in which the
equipment is installed complies with the standards
in force in the country of installation, at the time of
commissioning the equipment. If in doubt, contact
a qualified electrician. This equipment must also
be installed by an authorised, qualified person in
accordance with the electrical codes in force in the
country of installation at the time of installation.
The installation must also comply in all respects
with the technical specifications given in this manual
and in any document supplied with the appliance.
The equipment’s electrical cables must be
protected against any accidental damage. A
damaged cable must be replaced immediately,
using only a cable identical to the original. Never
cut or extend the electrical cables.
Only authorised, qualified people may work on the
equipment in case of failure or to perform maint-
enance. Always disconnect the power supply before
carrying out any technical work on the equipment.
Do not modify the equipment. Any modification of
the equipment can lead to risks to people as well
as the environment, and result in the deterioration
of the equipment.
ATTENTION
The detailed safety instructions in this manual are
not exhaustive. They detail the most common
risks encountered when installing and using this
equipment. Caution and common sense are
required when installing and using the equipment.
Model
Chlorine
product-
ion via
electrolysis
pH
regulation
Regulation of
chlorine pro-
duction with
ORP probe
UNO
DUO
PRO
Electronics unit
1x
Controller mounting
kit for electronics unit
(wall mount + screws
+ plastic anchors)
1x
In-line cell
1x
Nut
2x
Restrictor
2x
Collar
2x
Seal
2x
Power cable for
electronics unit
1x
Power cable
for cell
1x
Accessories
holder
(equipped with
2 reducers
and 5 caps)
1x
Salt/
temperature
/low-water
sensor
1x
Analysis kit
(test strips
+ reference
card)
1x
UNO
model
Pool Ground (optional)
1x
DUO
model
This packing list also includes the items below.
pH probe
1x
Filter with
ballast
1x
Injection
connector
1x
Probe
connector
1x
Stopper
1x
Semi-flexible
tubing
1x
pH calibration
kit (pH 7
so pH
10 solution)
1x
PRO
model
This packing list also includes the two sets of items below.
ORP probe
1x
ORP calibration solution
1x
Saddle clamp
(in kit)
1x
Probe connector
1x
Measuring
chamber
1x
Valve
2x
Controller
mounting kit for
the measuring
chamber (
plastic anchors)
1x
Fitting
2x
S
addle clamp
(in kit)
2x
Semi-flexible
tubing
1x
Sealing tape
1x
Measuring kit (optional):
4. PACKING LIST WITH IN-LINE CELL Non-binding images
• In this manual, the pictograms opposite
indicate a WARNING, or a NOTE OF CAUTION,
accompanied by instructions to be followed
to the letter.
• Failure to comply with these instructions
may result in significant risk of damage to
the equipment and/or serious injury to people.
THESE INSTRUCTIONS MUST BE FOLLOWED
AND COMPLIED WITH.
