20
Warning!
You should insert the screws in the
5 holes in the bracket support.
Screw down the bottom bracket
(1
right)
at the front with the 5 screws.
Position the bottom bracket
(1 right)
to coincicde with the factory -
machined holes. Fit screws in all
the holes made, for correct door
operation and to give it the
necessary rigidity.
Continue to mount the side hinges
without the roller holders and the
central hinges, positioning them
over the corresponding holes.
Check that the side and centre hinges
rotate freely.
MT10051002-GB /10-09-27
GB
RESIDENTIAL SECTIONAL GARAGE DOORS
INSTALLATION, USE & MAINTENANCE MANUAL
DOORS AND AUTOMATION SYSTEMS
1
