Norgren NC-MP-4A4B-12DLA/AL1403 Operation Manual Download Page 30 | Manualshive

Page: 30 / 72

Norgren NC-MP-4A4B-12DLA/AL1403 Operation Manual Download Page 30

OM-IO-Link Master.030

01/21

IO Link Master - PROFINET

NC-MP-4A4B-12DLA/AL1403

This device is “powered by ifm”. In all electronic interfaces, this device will

appear as AL1403. All firmware and electronic files are provided by ifm.

9.1.13. Firmware: Reset device to factory settings

9.1.14. Firmware: Reboot the device

When the IO-Link master is reset, all parameters are set to the factory settings:
To reset the device to factory settings:

‣

Select [Firmware] menu.

> The menu page shows the current settings.

‣

Click on [Factory Reset] to reset the device.

> LR DEVICE sets the device to the factory settings.

When rebooting the device, all settings are kept.
To restart the NC-MP-4A4B-12DLA/AL1403:

‣

Select [Firmware] menu.

> The menu page shows the current settings.

‣

Click on [Reboot] to reboot the device.

> LR DEVICE reboots the IMI Norgren IO-Link master.

«
...
28
29
30
31
32
...
»

Summary of Contents for NC-MP-4A4B-12DLA/AL1403









































































Reviews:

No comments