manualshive.com logo in svg

Norgren NC-MP-4A4B-12DLA/AL1403, Operation Manual, Page: 24 / 72

Share
Download
Norgren NC-MP-4A4B-12DLA/AL1403 Operation Manual Download Page 24

OM-IO-Link Master.024

01/21

IO Link Master - PROFINET

NC-MP-4A4B-12DLA/AL1403

This device is “powered by ifm”. In all electronic interfaces, this device will 

appear as AL1403. All firmware and electronic files are provided by ifm.

9.1.4. IoT: Configure the interface to LR AGENT or LR SMARTOBSERVER

9.1.5. Fieldbus: Configure IP settings

To enable transfer of process data from the IO-Link master to LR AGENT or LR 

SMARTOBSERVER, the interface has to be configured accordingly.

 

‣

Select [IoT] menu.

>  The menu page shows the current settings.

 

‣

Set the following parameters as required:

To be able to access the IO-Link master from the PROFINET network or with the LR DEVICE parameter 

setting software, the IP settings of the PROFINET interface must be adapted correspondingly.

 

‣

Select [Fieldbus] menu.

>  The menu page shows the current settings.

 

‣

Set the following parameters as required:

Name

Description

Possible values

[IP address LR Agent or SMARTOBSERVER] IP address of LR AGENT or LR SMARTOBSERVER

Factory setting: 255.255.255.255

[Port LR Agent or SMARTOBSERVER]

Port number that is used to send process data to LR AGENT or LR 

SMARTOBSERVER

0 ... 65535 

Factory setting: 35100

[Interval LR Agent or SMARTOBSERVER]

Cycle time for the transfer of the process data to LR AGENT or LR 

SMARTOBSERVER (value in milliseconds)

[Off]

no transfer

500 ... 2147483647

500 ms ... 2147483647 ms

[Application Tag]

Source identifier of the IO-Link master in the structure of LR AGENT or 

LR SMARTOBSERVER (String32)

Factory setting: NC-MP-4A4B-12DLA/AL1403

Name

Description

Possible values

[IP address]

IP address of the PROFINET interface

Factory setting: 0.0.0.0

[Subnet mask]

Subnet mask of the PROFINET network

Factory setting: 0.0.0.0

[Default gateway IP address]

IP address of the PROFINET gateway

Factory setting: 0.0.0.0

[MAC address]

MAC address of the IO-Link master

The value is firmly set.

[Fieldbus firmware]

After changing the parameter [Port LR Agent or SMARTOBSERVER] or [Application Tag], 

it may take 120 seconds before the device establishes a new TCP connection.
To prevent the delay:

 

‣

Reboot the device after changing the parameter.

 

‣

Save changed values on the device.

 

‣

Save changed values on the device.

Summary of Contents for NC-MP-4A4B-12DLA/AL1403









































































Reviews:

No comments