Nordson MicroMax 1, Manual

Page: 13 / 66

Safety
1‐1
E
2013 Nordson Corporation
All rights reserved
S1EN-03-[SF-Powder]-6
Section 1
Safety
Read and follow these safety instructions. Task and equipment specific
warnings, cautions, and instructions are included in equipment
documentation where appropriate.
Make sure all equipment documentation, including these instructions, is
accessible to all persons operating or servicing equipment.
Equipment owners are responsible for making sure that Nordson
equipment is installed, operated, and serviced by qualified personnel.
Qualified personnel are those employees or contractors who are trained to
safely perform their assigned tasks. They are familiar with all relevant
safety rules and regulations and are physically capable of performing their
assigned tasks.
Use of Nordson equipment in ways other than those described in the
documentation supplied with the equipment may result in injury to persons
or damage to property.
Some examples of unintended use of equipment include
S
using incompatible materials
S
making unauthorized modifications
S
removing or bypassing safety guards or interlocks
S
using incompatible or damaged parts
S
using unapproved auxiliary equipment
S
operating equipment in excess of maximum ratings
Make sure all equipment is rated and approved for the environment in
which it is used. Any approvals obtained for Nordson equipment will be
voided if instructions for installation, operation, and service are not
followed.
1. Introduction
2. Qualified Personnel
3. Intended Use
4. Regulations and
Approvals