Nordson MicroMax 1, Manual

Page: 23 / 66

Installation
3‐1
E
2013 Nordson Corporation
All rights reserved
MicroMax
Issued 12/13
P/N 768635_11
Section 3
Installation
WARNING: Allow only qualified personnel to perform the
following tasks. Observe and follow the safety instructions in this
document and all other related documentation.
Transport the unit so as to avoid damage. Do not throw the unit. Use
suitable packaging materials and sturdy cartons. See
Specifications
section for dimensions and weights.
Protect the unit from exposure to humidity, dust and vibrations.
Carefully unpack the unit to avoid damaging it. Check for damage caused
during transport.
Save packing materials for possible later use. Otherwise recycle or
dispose of properly according to local regulations.
Switch off the mains supply, then disconnect all electrical connections
from the unit.
Pack the unit in suitable packing materials and sturdy cartons. Protect
from humidity, dust and large temperature fluctuations (condensation).
Dispose of properly according to local regulations.
1. Transport
2. Unpacking
3. Removing
4. Storage
5. Disposal