Nordson iDry Series, Product Manual, Page: 40 / 57

Nordson iDry
r
Series Induction Dryers
34
Part 1075452 − 04
E 2016 Nordson Corporation
Ambient Temperature Compensation
The ambient temperature compensation option allows the dryer to track
ambient temperature changes in the plant and automatically adjust the ramp
power setting. This is beneficial for plants seeing substantial temperature
swings.
It is critical to complete the ramp power setup procedure that begins on
page 21 before you proceed. The initial ramp power setting obtained will be
loaded into the setup page for ambient compensation.
Ambient Temperature Compensation Setup
1. From the main Menu / Navigation screen, select the CONFIG button
(Password required).
2. See Figure 31. Select the AMBIENT TEMP COMPENSATION button.
TEMPERATURE
COMPENSATION
BUTTON
Figure 31 Configuration Screen
3. See Figure 32. On the Setup screen, select the PRODUCT TEMP
SETPOINT field and use the screen keypad to adjust the product
temperature setting.
4. On the Setup screen, select the RAMP POWER field and use the
screen keypad to adjust ramp power. Ramp power setting was obtained
by following the procedures listed on pages 21 − 24.
5. Select the ACCEPT SETTINGS button. The Menu / Navigation screen
appears.
Step 5
Step 3
Step 4
Figure 32 Setup Screen