Nordson DuraBlue D10L, Customer Product Manual

Page: 20 / 164

Introduction
2-2
Part 1032059B
E
2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Other Sources of Information
Refer to the following additional resources for quick-reference information,
technical support, and information about getting the most out of your
DuraBlue melter.
Installation Guide
The installation guide shipped with the melter provides a visual
quick-reference for installing the melter.
User’s Guide
The user’s guide shipped with the melter provides a visual quick-reference
to the most common operator-level tasks. The guide is appropriately sized
and laminated so that it can be kept with the melter on the production floor.
Product Resource CD
The resource CD, which is stored in the back of this manual, contains an
electronic version of this manual, parts information, and other useful
resources that are designed to assist you with using and servicing your
melter.
Product Description
See Figure 2-1. Nordson DuraBlue adhesive melters are used in
conjunction with Nordson hot melt hoses and guns to create a hot melt
application system.
The melter liquifies solid-form hot melt and maintains the hot melt at the
desired temperature. When the guns are activated, the melter pumps the
liquified hot melt through the hoses and out the gun nozzles, where it is
commonly applied to the surface of a product.