Nordson DuraBlue D10L, Customer Product Manual

Page: 16 / 164

Safety
1-10
Part 1032059B
E
2003 Nordson Corporation
Manual 41-DURABLUE-MA-02
Other Safety Precautions
S
Do not use an open flame to heat hot melt system components.
S
Check high pressure hoses daily for signs of excessive wear, damage,
or leaks.
S
Never point a dispensing handgun at yourself or others.
S
Suspend dispensing handguns by their proper suspension point.
First Aid
Do the following if molten hot melt comes in contact with your skin.
1. Do NOT attempt to remove the molten hot melt from your skin.
2. Immediately soak the affected area in clean, cold water until the hot melt
has cooled.
3. Do NOT attempt to remove the solidified hot melt from your skin.
4. In case of severe burns, treat for shock.
5. Seek expert medical attention immediately. Give the MSDS for the hot
melt to the medical personnel providing treatment.
Safety Labels and Tags
Figure 1-1 illustrates the location of the product safety labels or tags that are
affixed to the equipment. Table 1-2 provides the text of any safety message
that appears on each tag or the meaning of symbols that appear without
any safety message.
The installation kit provided with the melter may contain label overlays that
are printed in a variety of languages. If required by governing safety
regulations, apply the appropriate overlay to the text portion of the labels
shown in Figure 1-1.