Nordpeis Uno 1 Installation And User Manual Download

Page: 4 / 31

'LVDVVHPEOLQJ$VVHPEOLQJ7KHUPRWWH),*

'LVVDVHPEOLQJWKH7KHUPRWWH

FIG 12 - Uno 5;
FIG 13-16 - Uno 1, 2, 4 & 5.

FIG 12. Carefully pull the lower end of the side plate
silightly up and then pull towards the other side. The
same procedure utilize for second side plate.

FIG 13. Carefully pull the lower end of the back plate
diagonally towards the door. Leave it at an angle as
shown in the illustration.

),*5HPRYHWKHVPRNHEDႉHE\PRYLQJLWFDUHIXOO\

to one side and clear of the rail on the other side. Place

WKHVPRNHEDႉHDWDQDQJOHDQGFDUHIXOO\UHPRYHLW

through the door.

FIG 15. Remove the back plate by tilting it carefully
through the door.

FIG 16. Lift the bottom plate up on one side and the the
other.

$VVHPEOLQJWKH7KHUPRWWH

FIG 17- FIG 21 - Uno 1, 2, 4, 5
FIG 22 - Uno 5.

FIG 17. Carefully tilt the bottom plate through the door
opening. Carefully lower it down on one side before
lowering it on the other.

FIG 18.Tilt the back plate through the door and place it
at an angle (bottom part towards the door) . Leave the
back plate at this angle FIG 19.

),*&DUHIXOO\WLOWWKHVPRNHEDႉHWKURXJKWKHGRRU

and place it eavenly above the upper rails, one side at

WKHWLPH0DNHVXUHWKHVPRNHEDႉHLVFHQWHUHG),*

20C.

),*:KHQWKHVPRNHEDႉHLVLQSODFHFDUHIXOO\

push the bottom of the back plate in place.

FIG 22. Place carefully the side plate inside the com-
bustion chamber - set in diagonal position. Move the
plate pushing the lower end up and towards side. The
same procedure repeat with the second plate.

$GMXVWPHQWRIOHJV

Uno 1/2:

Do not have adjustable legs

Uno 4/5

Open the door under the combustion chamber FIG 3.

5HPRYHWKH¿WWLQJFRYHULQJWKHOHJDGMXVWPHQWDQG

adjust the legs with a 17 mm wrench.

In addition, Uno 4 has optional legs sold separately.
See manual Uno Legs for details.

3. Distance to combustible material

Ensure that the safety distances are respected
(FIG 1).

:KHQFRQQHFWLQJDVWHHOFKLPQH\WRWKHWRSRXWOHWXVH

the security distances required from the manufacturer.

$VVHPEO\

The

following tools are necessary:

•

5 mm Allen key (included)

•

10/17 mm wrench (included)

•

Screwdriver

5HOHDVLQJWKHVWRYHIURPWKHSDOOHW

Uno 1

: Remove the screws holding the back cover

on the pedestal.Remove the back cover to acess det
screws holding the stove to the pallet. Remove the
screws using a 10mm wrench. Put the back cover back
in place and fasten the screw holding it.

Uno 2:

7KHVWRYHLV¿[HGWRWKHSDOOHWERWKIURQWDQG

rear. Use a 10mm wrench to remove the transport locks

¿WWHGWKURXJKWKHEDFNSODWHRIWKHSURGXFW7RDFHVV

the screws in front, the panel under the door must be
removed. Open the door and pull the lower panel
carefully outwards and up. Loosen the screws and push
the product forward to release it from the pallet.

Uno 4/5:

Open the door under the combustion cham-

EHU5HPRYHWKH¿WWLQJFRYHULQJWKHOHJDGMXVWPHQWDQG

the four screws holding the product to the pallet.

2SHUDWLQJFRQWURO

:KHQWKHVWRYHLVLQDQXSULJKWSRVLWLRQDQGSULRU

to connecting it, control that all functions are easy to
manoeuvre and appear satisfactory.

'RRU),*

Handle is pulled out
Handle is pushed in

Open
Close

$LUYHQW

),*