Heat & Glo • Kenwood Corner Surround • 2118-934 • 4/07
1
CAUTION
Sharp Edges
• Wear protective gloves and safety
glasses during installation.
KENWOOD CORNER SURROUND
- Installation Instructions -
• These instructions apply only to the cabinet and facing
material that will surround the
fi
rebox.
• See the
fi
replace manufacturer’s installation instructions to
ensure that all clearance and installation requirements are
being met.
PREPARATION
Before beginning installation of this mantel, verify that the walls
and
fl
oor in the area of the installation are clean, plumb and
level. Any major deviation should be remedied before installing
the
fi
replace, marble or the mantel /cabinet.
These questions should also be considered and answered
before beginning installation of the mantel.
a. Is base molding already installed?
b. Where are the electrical outlets or
fi
rebox switch?
c. Is there enough distance between windows and edge
of cabinet?
d. Is the
fi
replace centered between walls?
e. Where is the return air vent located?
f. Is the
fi
replace centered between windows?
g. Where are the electrical & cable outlets positioned?
h. What type of
fi
nished
fl
ooring is to be installed?
It is recommended that two people assemble this mantel due to
its weight and upright positioning.
CAUTION
WARNING
Risk of Fire
• Improper installation or adjustment can
cause injury or property damage. For
assistance or additional information, contact
a quali
fi
ed installer, service agency or the
gas supplier.
• Comply with all minimum clearances to
combustibles as speci
fi
ed in the
fi
replace
manual.
CAUTION
Leave this manual with party responsible for
use and operation.
Tools and supplies needed:
#2 Phillips Screwdriver
High Temperature Silicone Caulk
Finishing Nails & Hammer
Level
Figure 1. Kenwood Corner Mantel Shown with Optional Base (Left) or without Base (Right).
