Page 98
Page 99
DE
EN
11 System settings
All the settings referred to in this section apply equally to DAB+, as well as to FM and Bluetooth
mode.
Proceed as follows to retrieve the
System
sub-menu:
>
Open the menu by holding down the
Menu/Info
button and use the
Tune/Select
knob to
select the
[System]
menu item. Press the
Tune/Select
knob to confirm.
All the functions explained below assume that the
System
sub-menu has already been
opened.
11.1 Alarm
The Transita 30 has 2 alarms.
The alarm function is only available in mains operation.
>
Open the
[System]
sub-menu as described in Section 11.
>
Use the
Tune/Select
knob to select the
[Alarm]
menu item. Press the
Tune/Select
knob to
confirm.
Alternatively, you can use the playback controls in the music app on your external device.
9.3 Cancelling pairing
Hold down the Scan button to cancel an active pairing. Note that the device to be unpaired must be
connected to the Transita30 if you want to unpair it. You can then pair a new device as described in
Section 9.2.
10 Sleep Timer
The Sleep Timer automatically switches the Transita 30 to
Standby
(mains operation) or
Off
(battery power) after the set time.
>
Press the
Volume/Snooze/Sleep
knob (
8
) to select a time period after which the Transita 30
should switch off. You can choose between
Off
,
10
,
15
,
30
,
45
and
60
minutes.
>
The Sleep Timer will be activated immediately. An "S" appears in the top right-hand corner
of the display with the remaining time until it is switched off.
If you want to deactivate an active Sleep Timer, press the
Volume/Snooze/Sleep
knob
repeatedly until
[Off]
appears on the display.
