24
Inspect and properly tighten all parts of the exercise
bike regularly. The exercise bike can be cleaned with
a soft, damp cloth. To prevent damage to the console,
keep liquids away from the console and keep the con-
sole out of direct sunlight.
CONSOLE TROUBLESHOOTING
If lines appear in the console display, see HOW TO
CHANGE CONSOLE SETTINGS on page 22 and
adjust the contrast level of the display.
If the console does not display your heart rate when
you use the handgrip heart rate monitor, see step 5 on
page 17.
If the console does not display your heart rate
when you use the chest heart rate monitor, see
TROUBLESHOOTING on page 13.
HOW TO ADJUST THE REED SWITCH
If the console does not display correct feedback, the
reed switch should be adjusted.
Before adjusting the
reed switch, first unplug the power adapter.
Next, remove the Seat Post Knob (27), pull off the
Knob Shield (9), and slide the Shield Cover (7) upward.
Then, remove all of the Screws (not shown) from the
Right and Left Shields (10, 11).
Carefully pull the tops of the Shields (10, 11) apart,
and locate the Reed Switch (57). Loosen, but do not
remove, the ST4.2 x 19mm Screw (35).
Next, rotate the Left Crank Arm (20) until a Magnet (55)
is aligned with the Reed Switch (57). Slide the Reed
Switch slightly toward or away from the Magnet. Then,
retighten the ST4.2 x 19mm Screw (35).
Plug in the power adapter and rotate the Left Crank
Arm (20) for a moment. Repeat these actions until the
console displays correct feedback.
When the reed switch is correctly adjusted, reattach
the parts that you removed.
MAINTENANCE AND TROUBLESHOOTING
7
9
27
10, 11
57
55
20
35
10, 11
