11
12
14
12.
Note: For clarity, the Console is not shown in
this step.
Attach the Front Console Cover (12) to the
Upright (4) with two M4 x 16mm Screws (34).
14. Attach the Accessory Tray (8) to the Upright (4)
with two M4 x 16mm Screws (34).
13.
Note: For clarity, the Console is not shown in
this step.
Hold the Rear Console Cover (15) near the
Upright (4). Connect the wire on the Rear
Console Cover to the Receiver Wire
Harness (59).
Tip: Avoid pinching the wires.
Press the Rear
Console Cover (15) onto the Front Console
Cover (12).
13
12
4
15
12
4
4
8
34
Avoid pinching
the wires
34
59
Wire
