NordicTrack Commercial X22i User Manual Download

Page: 4 / 44

19. Read, understand, and test the emergency

stop procedure before using the treadmill (see

HOW TO TURN ON THE POWER on page 21).

Always wear the clip while using the treadmill.

20. Be careful when mounting and dismounting

the treadmill. Always stand on the foot rails

when starting or stopping the walking belt.

Always hold the handrails while using the

treadmill.

21. When a person is walking on the treadmill,

the noise level of the treadmill will increase.

22. Keep fingers, hair, and clothing away from

the moving walking belt.

23. The treadmill is capable of high speeds.

Adjust the speed in small increments to

avoid sudden jumps in speed.

24. Never leave the treadmill unattended while

it is running. Always remove the key, press

the power switch into the off position (see

the drawing on page 6 for the location of the

power switch), and unplug the power cord

when the treadmill is not in use.

25. Do not attempt to move the treadmill until it

is properly assembled. (See ASSEMBLY on

page 8 and HOW TO MOVE THE TREADMILL

on page 31.) You must be able to safely lift 45

lbs. (20 kg) to move the treadmill.

26. Do not change the incline of the treadmill by

placing objects under the treadmill.

27. Never insert any object into any opening on

the treadmill.

28. Inspect and properly tighten all parts each

time the treadmill is used. Replace any worn

parts immediately. Use only manufacturer-

supplied parts.

29.

DANGER:

Always unplug the power

cord immediately after use, before clean-

ing the treadmill, and before performing the

maintenance and adjustment procedures

described in this manual. Never remove the

motor hood unless instructed to do so by an

authorized service representative. Servicing

other than the procedures in this manual

should be performed by an authorized ser-

vice representative only.

30. Over exercising may result in serious injury

or death. If you feel faint, if you become short

of breath, or if you experience pain while

exercising, stop immediately and cool down.

SAVE THESE INSTRUCTIONS

Summary of Contents for Commercial X22i













































Search results

Summary of Contents for Commercial X22i

Reviews:

Related manuals for Commercial X22i

Brands by name

Popular brands

NordicTrack Commercial X22i, User Manual

Search results

Summary of Contents for Commercial X22i

Reviews:

Related manuals for Commercial X22i

Brands by name

Popular brands