8
5. Apply some of the included grease to an M6 x
70mm Barrel Nut (89).
Orient the Handlebar (5) and the Upright (4) as
shown.
While a second person holds the Handlebar (5)
near the Upright (4), insert the Extension Wire
(59) upward through the Handlebar.
Tip: Avoid pinching the Extension Wire (59).
Attach the Handlebar (5) to the Upright (4) with
the M6 x 70mm Barrel Nut (89), two M8
Washers (43), and an M6 x 16mm Patch Screw
(97).
Then, insert an M6 x 60mm Barrel Nut (93)
through the lower bracket on the Handlebar (5).
Tighten an M6 x 16mm Patch Screw (97) into
the end of the Barrel Nut.
5
59
5
43
43
97
97
93
89
4
Grease
Avoid pinching the
Extension Wire (59)
6
90
90
6. While another person holds the Console (13)
near the Handlebar (5), connect the console
wires to the Extension Wire (59), the Pulse Wire
(61), and the Chest Pulse Wire (62).
Insert the excess wire downward into the
Handlebar (5) or upward into the Console (13).
Tip: Avoid pinching the wires.
Attach the
Console (13) to the Handlebar (5) with four M4
x 16mm Screws (90).
Avoid pinching
the wires
13
Console
Wires
61
59
5
62
