5
M4 x 16mm
Screw (90)–8
M4 x 5mm
Bright Screw
(91)–1
M6 x 16mm
Patch Screw
(97)–2
M10 x 95mm Patch
Screw (76)–4
M8 x 20mm
Patch Screw
(74)–4
M8 Split
Washer (75)–8
M6 x 60mm Barrel
Nut (93)–1
M6 x 70mm Barrel
Nut (89)–1
M8 Washer
(43)–2
M8 Locknut
(72)–4
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise cycle in a cleared area and remove the pack-
ing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires a Phillips screwdriver
, an adjustable
wrench
, and a rubber mallet
.
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity needed for assembly.
Note: If a part is not in the hardware kit,
check to see if it has been preassembled.
