ENGLISH
SETTINGS FOR FIRST IGNITION
Once the power supply cable is connected, turn the POWER switch on the digital display to position (
I )
.
Proceed with IGNITION, as described below.
THE IGNITION
TEMP. TEMP. READ
TEMP. SMOKE
% SMOKE MOTOR OPERATION
25°C
20°C
0 %
WATER Temp.
SMOKE
AIR
THE IGNITION MENU
TEMP. READ SET. TEMP.
IGNITION ON
xxx °C 80° - 85°C
MENU
x 3sec
BOILER
TEMPERATURE
FLASHING
OFF
PUFFER
TEMPERATURE
BOILER
TEMPERATURE
PUFFER
TEMPERATURE
FLASHING
PUFFER
TEMPERATURE
SMOKE
TEMPERATURE
FLASHING
MENU
SMOKE
TEMPERATURE
BEFORE IGNITING THE BOILER, IT IS NECESSARY TO ENSURE THE CERAMIC
STONE IS POSITIONED CORRECTLY IN THE LOWER COMBUSTION CHAMBER.
ANY RESIDUAL ASHES MUST BE REMOVED.
THE CERAMIC STONES MUST BE PLACED AS SHOWN IN THE FIGURE AND
PUSHED AGAINST THE BACK.
EXCESSIVE ASH RESIDUES PREVENT A COMPLETE THERMAL EXCHANGE
BETWEEN THE SMOKE AND THE WATER, THUS REDUCING PERFORMANCE.
It is possible to visually check the flame from a glass peephole.
NEVER BLOCK THE UPPER PEEPHOLE
.
SECONDARY air controller
always leave it 50% open
BASIC COMBUSTION AIR SETTINGS
55
