21
NOTE! Usually the Host Application has been defined to take control of the
display contents immediately after the connection between the RF650 and the
WRAP has been established.
5.11 Setting the PIN-code
Before the RF650 Hand Terminal can be used in a host application
environment, the PIN-code of the Bluetooth system needs to be set on the
Hand Terminal.
Standard practice is that the system adminis trator sets the PIN-code on the
Hand Terminal units.
How to set the PIN-code on the RF650 Hand Terminal
The PIN-code is set using the ”Settings” menu on the unit.
1. Press SHIFT + 0 from the keyboard (Shift needs to be pressed down as you press 0)
2. Select “Settings” with the arrow keys and press OK
3. Type in the password (0000-9999),
or if it has not been set up, just press OK
4. Select ”PIN code” and press OK
5. Type in a PIN-code between 0000-9999 and press OK
After setting up the PIN-code, a screen that searches for the Base Stations
will appear:
5.12 Searching for the Base Stations
Select [SEARCH] and press OK.
The RF650 Hand Terminal will begin to search for base stations automatically
after power-up and this will usually take 15 – 30 seconds. A list will appear on
the RF650 display listing all the names of the Bluetooth devices nearby.