nord 6052902/0213, Manual With Installation Instructions

Page: 21 / 128

3 Transport, storage, assembly
B 1050 en-3921 21
3 Transport, storage, assembly
3.1 Transporting the gear unit
WARNING
Hazard due to falling loads
• Do not use the eye bolts on a mounted motor to lift the unit.
• Note the centre of gravity of the gear unit.
Transport the gear unit with care. Impacts to the free ends of shafts may cause internal damage to the
gear unit.
No additional loads must be attached to the gear unit.
Use suitable aids such as cross-beams or similar to facilitate transportation of the gear unit. Gear units
may only be transported with shackles and lifting strapschains at an angle of 90° to 70° to the
horizontal.
Only transport gear units which are filled with oil in their installation position.
Attachment to the ring bolts must not result in diagonal pulling. If necessary, use suitable attachment
swivels.
Check the lifting gear before use.
The illustrations in the following sub-sections show examples for transporting the gear unit.