NORDAC SK 750E Manual
54
Technical design subject to change
BU 0750 GB
4 Operation and display
To operate the SK 750E various solutions are available of which the optimal one can be adopted for any appli-
cation situation. For instance if a control unit is to be used on the spot very close to the inverter, the
handheld
version
of the
ParameterBox
can be connected directly with a M12 connecting plug. This module not only al-
lows for controlling and parameterizing the frequency inverter, but also for reading out current operating values
and for saving data records to memory (see also Section 4.2, "ParameterBox, handheld version").
The ParameterBox is also proposed as a
panel-mounting type
for permanent installation. Functionality is the
same as with the handheld type (see also Section
ParameterBox panel-mounting type
’).
M12 female connector
on device as standard
Each of the NORDAC frequency inverters allows for being controlled and parameterized with the
NORD CON
software which is available free of charge. Running it on a Laptop or personal computer connected to the fre-
quency inverter provides a convenient method of performing diagnostic functions and of successfully optimiz-
ing a drive. Parameter sets and oscillograms can be stored, edited and saved to a file. For more information
see Section 5‚ 'NORD CON software’.
NORD CON to be downloaded from the following Internet site : >
